Are you having trouble connecting to the TP-Link repeater WiFi network? That means no internet access. This is one of the most common yet serious issues that every TP-Link repeater user faces. But don’t be concerned! We’ve got your back! In this post, we promise to assist you in quickly resolving this vexing problem. When the issue is resolved, you will be able to simply access the TP-Link login extender page. Let’s get right to the point!
Reboot Your TP-Link Repeater
Yes, you read that correctly! Sometimes a simple reboot, restart, or power cycle is all that is required to resolve issues with your TP-Link WiFi range repeater. Follow the step-by-step instructions below to begin the process:
Step 1: Turn off your TP-Link WiFi repeater and wait for a few moments.
Step 2: After that, reconnect your TP-Link repeater.
Step 3: Select a wall socket close to your existing router for your TP-Link repeater.
Step 4: After connecting your TP-Link repeater, wait for the power LED to stabilise.
After that, connect your device to the TP-Link repeater’s network to see if the problem has been resolved.
Use the Correct WiFi Password
Remember that you can only connect to the TP-Link repeater’s WiFi network if you enter the right password (network key or passphrase). As a result, we recommend that you enter the password correctly to resolve the “unable to connect to TP-Link repeater WiFi network” problem. If you’re using the right password and still can’t connect to the internet, there could be a problem with your TP-Link repeater.
To fix this problem, verify sure your TP-Link repeater isn’t picking up signal interference from nearby WiFi devices. To accomplish this, keep your TP-Link repeater away from corners, doors, and windows. Furthermore, keep your TP-Link repeater outside the cabinet and above the table.
If the “unable to connect to TP-Link repeater WiFi network” error persists, reboot your device.
Update the Firmware
Check to see if your TP-Link repeater is running an improved firmware version. If you are using an old or outdated version of firmware on your TP-Link repeater, you will undoubtedly encounter this issue. To get rid of it, it is critical to change the firmware of your TP-Link WiFi repeater (where available). You may easily upgrade the firmware by going to the tplinkrepeater.net or 192.168.0.254 IP address’s web-based setup page.
- Right away, make sure your TP-Link repeater has a stable and fluctuating power source.
- Make certain that your TP-Link repeater is disconnected from all connected devices.
- Then, on your TP-Link WiFi range repeater, locate the reset hole.
- After that, gently insert a pin, paper clip, or other similar object into the TP-Link repeater reset hole.
- Hold down the reset hole for a few seconds before releasing it.
- That’s all! Following the reset, you must redo the TP Link setup procedure
Endnote
These are the solutions you can use to resolve the “unable to connect to TP-Link repeater WiFi network” problem. Thank you for taking the time to read my content.
